How you can Add a Washer and Drier Hookup

Adding a washer and drier to an condominium, condo or perhaps townhouse isn’t a simple home improvement task. It will take plumbing, venting, electrical, and gas relationships that can add approximately five times the price of the machines themselves.

The first step is to prepare the location with regards to the new laundry room. This involves measuring hallways, doorways, and stairways to ensure that the new automatic washer will match and connect with the power, water, and gas lines. It also helps you to remove doorways or maneuver furniture mainly because needed.

If you plan to include a automatic washer in an property or condominium, you will need to check the building’s alteration agreement and house rules. Some complexes may prohibit the installation of washers and washer dryer combos, but other folks will allow them with proper approvals and permits.

In any case, you will need to check local building requirements and consult with a company or plumber before you begin the washer and drier hookup procedure. You’ll likely desire a permit, which could run between $30 to $150 depending on the volume of involved.

Connecting Washer Hoses

When installing a washer, it’s essential to use the proper hose to your particular style. This line typically screws in the washer wall socket box and it is attached to the spine of the equipment. In some cases, it has the color coded with red to get hot and blue just for cold normal water.

Drain Hoses

You may need a drain hose-pipe to hook up the washing machine and a drain faucet within a nearby laundry room. Many drain hoses will be u-shaped and connect right to the washing machine avenue box. They’re available for the majority of major brands of washers, and find them for the most part appliance vendors.


資料請求・お問合せ TEL.0532-38-0525

(電話 平日11:00~19:00受付)